Snap-on Industrial’s portable plasma cutters can cut up to 3/4” thickness on a variety of ferrous, non-ferrous and high-strength materials.
Users can adjust the depth of the cut, so the top layer can be cut without disturbing the base layer.
Performance specs for the cutters include:
- PLASMA20i
- Maximum output amps: Adjustable 5-20
- Cut thickness: 1/4”
- Sever thickness: 3/8”
- Primary input (Volt AC): 115
- Primary input: 20 A
- Duty cycle rating: 100% at 15 A
- Minimum compressed air requirements: 50 PSI at 5 CFM
- Torch and ground cable lengths: 12’
- PLASMA30i
- Maximum output amps: Adjustable 5-25
- Cut thickness: 3/8”
- Sever thickness: 1/2”
- Primary input (Volt AC): 115 or 230
- Primary input: 30 A 115 V or 20 A 230 V
- Duty cycle rating: 60% at 22 A
- Minimum compressed air requirements: 50 PSI at 7 CFM
- Torch and ground cable lengths: 12’
- PLASMA60i
- Maximum output amps: Adjustable 20-55
- Cut thickness: 3/4”
- Sever thickness: 3/4”
- Primary input (Volt AC): 208/230
- Primary input: 40 A
- Duty cycle rating: 60% at 40 A
- Minimum compressed air requirements: 68 PSI at 7 CFM
- Torch and ground cable lengths: 18’
More info b2b.snapon.com/
